Harmar Mobility AL500 User Manual download pdf (Page 9)

AL550 only

CHOOSING A LOCATION and MOUNTING THE DOCKING DEVICE PLATE

Find approximate

center of the chair

The closer the plate is

positioned to the drive

wheels, the easier the

chair will be to engage

the Locking Device

Drive

wheel

Use existing holes where ever possible.

If too little or no holes exist,

holes need to be drilled. Remove

power chair's batteries, and use

plate as a template.

Drill as required.

Attach to chair using supplied

hardware.

4---1/4-20 x 1.00" HHCS

4---1/4-20 Nylock Nut

WARNING: Do not attempt to use this automatic lock down device

on any folding, or take apart chairs unless recommended

by Harmar.

DOCKING

DEVICE

PLATE

ATTACHED TO PLATE

INSTALLATION

CHAIR PREPARATION

DO NOT USE SPACERS HERE

SPACERS BELONG UNDER THE

STATION ON THE PLATFORM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Harmar Mobility AL500 User Manual Page 9